Natural Wood Finish
Warm architectural character with a wood-inspired appearance.
ARCHITECTURAL ALUMINUM SYSTEMS
Architectural Aluminum.
Built for What’s Next.
CLADEX architectural aluminum systems give commercial façades depth, rhythm, texture, and a distinctive material identity.
CLADEX PRODUCT FAMILY
Five Profiles. One Architectural Language.
Five architectural aluminum profiles designed to bring depth, rhythm, clean lines, and material character to modern exterior environments.
APPLICATIONS
Designed for contemporary exterior environments.
Commercial FaçadesExterior WallsEntrances
Feature WallsHospitalityRetail
OfficeMixed-UseInstitutional
COLORS & FINISHES
Three Finish Directions.
One Architectural System.
Every CLADEX profile is offered in Natural Wood Finish, Matte Black, and Matte Gray.
Matte Black
A restrained dark architectural finish for contemporary façades.
Matte Gray
A neutral architectural finish suited to modern commercial environments.
Digital finish representations are for general visual reference only. Actual appearance may vary by profile, lighting, production process, and display. Review physical samples before final specification.
TECHNICAL RESOURCES
Resources for project teams.
Technical documentation is being finalized. Contact CLADEX for current product information, drawings, samples, or project-specific support.
Product Data SheetsSpecificationsCAD Details
Installation GuidesBIM / Revit FilesFinish Information
REQUEST TECHNICAL INFORMATION
TECHNICAL RESOURCES
Design. Specify.
Install.
Technical information organized for architects, contractors, installers, and project teams. Review the information directly below without leaving the CLADEX website.
01
SYSTEM OVERVIEW
Architectural interlocking aluminum profiles.
System Concept
The supplied source describes an architectural interlocking aluminum panel system intended to combine weather-resistant façade performance with the visual warmth of natural materials and the durability of extruded metal.
It describes a concealed-fastener, tongue-and-groove concept intended to allow multiple profile geometries to be integrated on the same plane.
CLADEX Profile Family
Triple Ridge 150150 mm cover width
Plane 150150 mm cover width
Plane 200200 mm cover width
Double Ridge 120120 mm cover width
Quad Ridge 200200 mm cover width
FINISH DIRECTIONSNatural Wood Finish · Matte Black · Matte Gray
02
PRODUCT DATA
Profile schedule & preliminary technical reference.
PROFILECOVER WIDTHGEOMETRY
Triple Ridge 150150 mmThree-ridge textured architectural profile
Plane 150150 mmFlat, narrow-format profile
Plane 200200 mmFlat, wide-format profile
Double Ridge 120120 mmDouble-ridge textured architectural profile
Quad Ridge 200200 mmFour-ridge textured architectural profile
PRELIMINARY TECHNICAL INFORMATION
The supplied draft references 6063-T5 aluminum, nominal wall thickness of 0.060–0.075 in, approximate weight of 1.2–1.8 lb/ft², a universal tongue-and-groove channel, fluoropolymer powder coating referenced to AAMA 2604/2605, and a wood-grain vacuum-sublimation process. These items require supporting manufacturer documentation before being represented as verified CLADEX specifications.
TESTING / COMPLIANCE
The supplied draft references ASTM E136, ASTM E84, ASTM E330, ASTM E331, HVHZ capability, recycled content, recyclability, and zero-VOC claims. Applicable test reports, certificates, engineering schedules, or manufacturer declarations should be obtained before project specification.
03
INSTALLATION
Preliminary installation guidance.
Site Pre-Conditions
The supplied draft states that the structural substrate should be plumb and true, with maximum deviation of 1/4 in over a 10 ft span (6 mm over 3 m).
Support & Furring
The draft references fastening points at 16 in or 24 in on center depending on wind-load and code requirements, with securely anchored furring where required by panel orientation.
Moisture Management
The cladding is described as a rainscreen rather than a primary water barrier. A continuous code-compliant WRB or fluid-applied barrier should be installed and flashed before the panels.
Fastening
The draft calls for non-corrosive Type 304 or 316 stainless-steel pan-head screws and cautions against countersunk screws that could distort the aluminum fastening flange.
Thermal Movement
The draft emphasizes expansion and contraction and references approximately 1/4–3/8 in clearance at terminations, with panel attachment arranged to permit movement.
Cutting & Handling
The draft recommends a carbide-tipped non-ferrous metal cutting blade, carrying panels on edge, and retaining protective film during cutting before removal after installation.
PROJECT-SPECIFIC REQUIREMENTS
This is preliminary guidance derived from the supplied source document, not stamped engineering or a verified manufacturer installation manual. Attachment schedules, wind loads, trims, flashings, waterproofing, fire performance, and code compliance must be confirmed for the actual system and project.
NEED PROJECT-SPECIFIC INFORMATION?
Talk with CLADEX project support.
ABOUT CLADEX
Built for the people shaping the exterior.
CLADEX is a U.S.-focused architectural aluminum systems brand serving commercial construction and design professionals. We work with architects, contractors, installers, developers, and building professionals to help bring architectural façade concepts into built environments.
PROJECT SUPPORT
Let’s Build the Exterior.
For samples, quotes, product information, and project support, contact the CLADEX team.